Turf underlay is a purpose-blended growing bed for new turf, usually washed river sand, heavier soil and composted material. Topsoil is the natural surface layer of soil, sold in many grades and not designed for any one job. If your existing soil is good, you may need neither. If it is heavy Sydney clay, compacted fill or thin builder’s leftovers, a quality underlay laid over a prepared base is usually the safer choice for a lawn that roots quickly and drains well.
This guide explains how the two differ, how deep each layer should be, how to decide for your site, and how to lay the bed so the turf you buy actually establishes.
The short answer: what each product is for
| Turf underlay | Topsoil | |
|---|---|---|
| What it is | A blended bed made for turf, typically sand, soil and compost | The upper layer of natural soil, screened or blended, in varying quality |
| Main job | A firm, free-draining base for water movement and root growth | Supplying a general growing medium and nutrients for plants |
| Consistency | Should be the same from load to load when bought from a reliable supplier | Varies widely with source, clay content and weed seed load |
| Best for | New turf, especially over clay or poor fill | Garden beds, levelling low spots, topping up thin soil |
| Typical risk | Too sandy a mix will dry out quickly | Too clay-heavy a load can compact and waterlog |
Turf Queensland describes underlay as the foundation or bed for turf, generally a mix of washed river sand, heavier soil and composted material that forms a firm base for water movement and retention and helps roots develop. That is the key difference. Underlay is formulated for turf. Topsoil is simply soil, and what you get depends on where it was dug.
What turf underlay actually does
New turf arrives as a thin mat of grass with a shallow layer of soil attached. Within the first couple of weeks its roots must leave that mat and grip the ground beneath. Whatever sits under the turf decides how fast that happens.
A good underlay does three things:
- Drains freely. Sand in the blend keeps air spaces open so water moves through rather than pooling around the roots.
- Holds enough moisture. The soil and compost fraction retains water and nutrients so the lawn does not dry out between waterings.
- Stays firm and level. A well-graded bed rolls to a smooth surface and resists settling into hollows.
Industry commentary from Landscape Contractor makes a related point: sand-soil turf blends are designed to keep pore space for air, water and roots rather than compact like engineered fill, which is why the exact blend and particle grading matter. Two products both labelled “underlay” are not automatically equal, so ask your supplier what is in the mix.
We cover the blend and quantities in more detail in our guide to turf underlay mix, and you can see what we supply on our turf underlay page.
What topsoil is, and where it falls short under turf
“Topsoil” is a broad label. It can mean a screened loam, a blend of sandy loam and clay loam, or a dark, weedy fill that happens to be cheap. Good topsoil is a perfectly respectable growing medium, and it has real uses around a property: filling garden beds, raising a low corner, or building up a thin layer over a sound base.
The trouble under turf is consistency and structure. Because topsoil is not made to a turf specification, a load may be:
- Too heavy. High clay content compacts under a roller and foot traffic, then holds water on the surface after rain.
- Too fine. Silty material can seal over and shed water rather than absorb it.
- Full of weed seed. Unscreened loads can bring couch, nutgrass or broadleaf weeds straight into your new lawn.
- Variable. What you inspected on one visit may not match the delivery.
None of this means topsoil is wrong for lawns. It means you should inspect it, ask how it was screened, and be honest about whether it drains. If you are unsure, an underlay blend removes much of the guesswork.
Do you need either? Start with the soil you already have
Before buying anything, look at what is already in the ground. Turf NSW’s consumer guide advises using existing soil if it is suitable and importing material only when the native soil is not. The same guide says the surface should be smooth and firm, but not compacted, before turf goes down.
A simple site check:
- Dig a test hole about 200 mm deep in two or three spots. Note how much dark, crumbly topsoil you find before reaching clay, rubble or subsoil.
- Squeeze a moist handful. If it forms a sticky, shiny ribbon, it is clay-heavy. If it will not hold together at all, it is very sandy.
- Pour water into the hole and watch. If it is still standing after a few hours, drainage is poor.
- Check for building waste. New-build blocks often have buried brick, concrete and compacted fill just below a thin skim of soil.
- Note the shade. Shaded areas have different depth requirements, covered below.
If the existing topsoil is deep, crumbly and drains well, you can rake, level and lay. If not, you are choosing between improving it and replacing the top layer.
How deep should the layer be?
Depth figures come from different sources because they describe slightly different things. Here is how they fit together.
| Source | Figure | What it refers to |
|---|---|---|
| Turf NSW | At least 180 mm (130 mm in shade) | Total suitable topsoil for a healthy new lawn |
| Turf Queensland | At least 100 mm | Minimum depth of turf underlay |
| A NSW council water-smart gardens guide | At least 150 mm | Recommended topsoil depth before applying turf |
The practical reading for a Sydney block: aim for a total root zone of around 150 to 180 mm of suitable soil, with underlay making up at least the top 100 mm where you are importing it. Where the lawn is shaded, 130 mm is described as just sufficient, but more is better for a lawn you want to last.
Our own guide to preparing soil for turf with 100 mm of underlay walks through the layer in Sydney conditions.
When to use underlay, topsoil, or both
Use underlay alone when the base is already sound
If you have stripped the old lawn, the subsoil is loosened and reasonably free-draining, and you only need a good surface bed, a 100 mm layer of underlay is a straightforward answer. It suits new landscaping where the levels are set and you want a consistent bed from edge to edge.
Use topsoil first when depth is the problem
On sites with only a thin skim of soil over rubble or hard subsoil, you may need to build depth before you can think about a surface bed. Good screened topsoil can make up that depth, as long as it is not heavy clay. Loosen the subsoil beneath it so water can move down, then finish with underlay as the top layer where drainage is a concern.
Use both when you are combining depth and drainage
Many Sydney projects end up here: a thicker layer of decent topsoil to reach the recommended depth, then a final layer of underlay so the turf sits on a free-draining, even bed. This is common on new builds where the soil was stripped or compacted during construction.
Skip both when the lawn is established
If you are trying to level or improve a lawn that already exists, you want neither. That is a job for top dressing, covered below.
Why Sydney clay changes the decision
Much of Sydney sits on clay-heavy soil. A 2025 turf industry assessment of sporting fields notes that in clay situations, turf underlay helps ensure free drainage, because native clay can cause waterlogging and slow root recovery unless it is amended with gypsum or topped with a free-draining layer.
In practice, that means:
- Do not simply rotary-hoe a few centimetres of clay and lay over it. The turf will root into the top layer, then stall where it meets a sealed clay base.
- Loosen the subsoil before adding the new layer so the boundary between the two is not a wall.
- Consider gypsum for sticky clays, and put a free-draining bed on top.
- Avoid mixing too much sand into clay alone. Sand blended into clay without enough proportion can behave like a weak concrete. Our article on whether adding sand to lawns is a good idea explains where sand helps and where it does not.
The same assessment recommends using quality compost that complies with Australian Standard AS 4454 when amending soil, to improve structure, fertility and infiltration. If you are adding compost to a bed yourself, look for that standard on the product. We also outline the benefits of adding compost to your lawn.
What to look for when buying a turf-growing mix
Whichever product you choose, these questions separate a good load from a poor one:
- What is in it? Ask for the proportions of washed sand, soil and compost. Washed sand matters because unwashed sand can carry salts and fines.
- Is it screened? Large clods, stones and roots make a smooth finish impossible.
- Is the compost mature? Fresh, unfinished compost can heat up and rob nitrogen from the soil.
- Is the blend consistent? For larger jobs, ask whether every load will match the first.
- Does it suit your turf? Warm-season grasses such as buffalo, zoysia, kikuyu and couch all want drainage, but sand-heavy blends need more frequent watering early on.
If you are seeding rather than laying turf, the same principle applies, and a guide to hydroseeding and soil preparation shows how much the seedbed matters whichever method you choose.
How to prepare the ground, step by step
Turf Queensland’s guidance recommends removing existing weeds and grass, then levelling, rolling and watering the underlay before the turf goes down. Here is a practical sequence:
- Clear the site. Remove the old lawn, weeds, roots, rubble and rubbish. Kill persistent weeds such as kikuyu or couch runners before you start, or they will return through the new turf.
- Set your levels. The finished turf surface should sit slightly below paths, driveways and edging so mowers and water do not catch the edge. Allow for the thickness of the turf itself.
- Loosen the subsoil. Break up compacted ground to the depth of a fork or rotary hoe, especially on clay.
- Add topsoil only if you need depth. Spread it evenly and blend the top of it into the layer beneath.
- Spread the underlay. Aim for at least 100 mm after settling. Rake it to a gentle fall away from the house.
- Roll lightly and water. Rolling shows up soft spots and hollows. Fill and re-rake them. Watering settles the bed.
- Apply a starter fertiliser. A pre-turf fertiliser gives the roots something to reach for. Our Lawn Launcher starter fertiliser is made for that moment.
- Lay turf the day it arrives. Stagger the joins like brickwork, press the edges tight and water straight away.
Turf that is fresh from the farm establishes best when it goes down promptly onto a ready bed. Plan the delivery after the bed is finished, not before.
Underlay, topsoil and top dressing are different jobs
The search results for this topic mix up three products, so here is the distinction.
- Turf underlay is the bed beneath new turf.
- Topsoil is general soil for building depth or filling beds.
- Top dressing is a fine material spread thinly over an established lawn to even out bumps and improve the surface.
Turf Queensland notes that top dressing should be applied no more than 5 to 10 mm at a time, while underlay should be at least 100 mm deep. Burying an existing lawn under a thick layer of topsoil smothers it. If you need to level an established lawn, spread thin layers and work them into the canopy. Our guide to lawn top dressing mix covers what to use and how to apply it.
Common mistakes that cause patchy turf
Laying straight over compacted clay. Roots stay shallow, water sits on the surface and the lawn thins in the first summer.

Using too little depth. A thin layer over rubble dries out quickly and limits root growth.
Choosing unscreened fill. Weeds and stones show through almost immediately.
Leaving the bed soft and uneven. Hollows pool water, and high spots scalp under the mower.
Ignoring the early watering schedule. Even a perfect bed needs consistent moisture while roots knit in. Our week-by-week new turf watering guide is written for Sydney conditions, and you can see how long new turf takes to bed in.
Getting the turf and the bed from one place
If you are building a new lawn in Sydney, it helps to have the bed, the turf and the delivery planned together. We grow our turf in the Hawkesbury and supply it direct from the farm across Sydney, with varieties including Sir Walter DNA Certified Buffalo, TifTuf Bermuda, Sir Grange Zoysia, Stampede Hybrid Buffalo, Zoysia Australis and Eureka Kikuyu. Our turf is genetically pure and AusGAP-certified, and it is harvested only from mature crops, which is designed to make establishment easier. We also supply turf underlay, washed river sand, top dressing and lawn care products, and we offer a turf laying service.
Browse current varieties and prices in our turf shop, or see our turf for sale in Sydney page for delivery details. If you are unsure which variety suits your shade, traffic and soil, ask us before you order.
FAQ
Can I use topsoil instead of turf underlay?
Yes, if the topsoil is a free-draining, screened loam and you inspect it before it is spread. Heavy, clay-rich or unscreened topsoil is the main risk, because it compacts and holds water under the turf. When in doubt, use underlay as the top layer.
How thick should turf underlay be?
Turf Queensland advises at least 100 mm of underlay. Turf NSW recommends at least 180 mm of suitable topsoil overall for a healthy new lawn, or 130 mm in shaded areas. Where your existing soil is good, it counts toward that total.
Can I lay turf directly onto existing soil?
You can if the soil is suitable, meaning it is deep enough, drains well and is smooth and firm without being compacted. Test it first. If it is sticky clay or full of rubble, improve it or add a suitable layer on top.
What is the difference between top dressing and topsoil?
Top dressing is a fine material spread thinly, around 5 to 10 mm at a time, over an existing lawn to level and improve it. Topsoil is bulk soil used to build depth or fill beds before planting or laying turf.
Do I need underlay in Sydney if I have clay soil?
Usually it is worth it. Clay can waterlog and slow root recovery, so loosening the subsoil, treating with gypsum where suitable and laying a free-draining underlay on top gives new turf a better start.